1. INSTALLATION
Because of metrological legislation, installation/some
metrological parameter settings are limited to be done by
authorized personnel only. Do not attempt to change any of the
built-in parameters. Contact your dealer for installation and
technical assistance.
CAUTION:
This scale is legal for trade only when it is sealed (and/or
stamped) and bearing a serial number. Do not attempt to break
the seal (or stamp) affixed to this scale or remove the serial
number. Contact your dealer for more information and after
sales service.
For most accurate weighing result, do not use the unit in where
or when the environment condition falls beyond as those listed
on SPECIFICATIONS.
Do not attempt to open this scale or conduct any trouble
shootings other than those listed on TROUBLE SHOOTING.
To Next Page
Loading...
