Fidelity Electronics DM-3000 - Error Codes

11. ERROR CODES
Error
Code No.
Description
Err 1
Time value error
Err 2
Date value error
Err 3
Exceed maximum power on / manual zero range
Err 4
Offset out of range / unstable during power on
Err 5
No load cell signal detected
Err 6
Tare operation error
Err 7
Logic error. HI limit set is lower than LO limit
(and HI is not = 0)
Err 8
Logic error. LO limit is higher than HI limit
(and HI is not = 0)
Err 9
ERROR IN PERCENTAGE FUNCTION. INPUT VALUE
= 0 or less than 50e
--oL--
Overload (Gross weight is more than Max plus 9d)
UndEr
Negative Weight values exceeds display range
------
Negative Tare value exceeds display range