32
Firmware View and Update
Firmware often becomes available as new
refrigerants and features become available.
Before entering this mode, download from
www.fieldpiece.com and transfer from the
computer to the manifold via the micro USB port
on the side.
Or you can initiate an update over the air from
your mobile device running the Job Link system
mobile app while the version is displayed.
MENU/F Ware
1. View the rmware version on the top line, P/T chart on the
second line, and radio region on the bottom line.
2. If a new rmware le is found on the internal ash drive the new
versions will be shown. Choose whether or not you want to update.
3. Once installation begins you will see a bar moving across the
screen. “donE” will appear and your SMAN manifold will turn o
when nished.
• Press MENU to exit at any time before installation begins.
• During installation, buttons are disabled.
• User settings are not deleted.
• Log les are not deleted.
To Next Page
Loading...
