13
Output settings
1. Output the computer audio from the mic.
a. Plug the headphone to the 3.5mm jack at the bottom of the mic if you
want to monitor your voice in real time. Click the "Playback" tab from the
Sound pane, select "FIFINE K658 Microphone" as the default output device
if you want to monitor your voice mixed with the computer audio.
b. Click the Speaker (FIFINE K658 Microphone) – Properties – Levels, and drag
progress bar to adjust output volume.
(Make sure the speaker and the microphone are active under the Levels tab.)
2. Output the audio from the computer
a. The mic will become the default output device automatically when it plugs
into the computer. If you want to listen to the sound from the built-in
speaker of the computer directly, please click the "Playback" tab from the
Sound pane and choose “Realtek High Definition Audio” as the default
output device.
b. If you want to connect the headphone to the computer and listen to the
sound, please select the Headphone as output device.
Note: (Applicable for MAC and Windows)
• If the computer prompts that it's unable to identify this USB devices please
restart computer and replug the mic into other USB port.
• If mic is recognized but no sound coming out, please check whether System
Sound is mute and whether you have turned the knob on the mic to minimum.
Make sure the LED indicator is green (means the microphone's on).
• If your computer runs windows, please check off the box “Listen to this device”
when you are using any recording software (such as Audacity) or chatting
software (such as Skype), otherwise you would hear double audio just like echo.
• Click the "Recording" tab and click the FIFINE K658 Microphone - Properties -
Listen - check off the box “Listen to this device” - Apply.
• lf your computer runs windows 10, please go to settings > privacy > microphone
and click the Allow apps to access the microphone to ON then restart.
To Next Page
Loading...
