EasyManua.ls Logo

Fifine SC3 - Function Key Instruction; 48 V Phantom Power & Electric Button

Default Icon
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Function Key Instruction
When the functions on the mixer are activated, the button shows white light. When the
functions are off, the button shows RGB light or no light. (RGB function excepted.)
48V Phantom Power
Short press the button to turn on or off 48V Phantom Power.
Tips: Please check if your XLR condenser microphone needs 48V phantom power to avoid
damaging your device. Make sure to turn off the function when not required.
Electric Button
Short press to turn on electric tone, while long press for 2 seconds to turn off.
There are 12 kinds of electric tones option. Short press to switch tone, and corresponding
indictor will be lightened up. (Only available for microphone recording.)
Tips: Electric tone and voice change function can be used at the same time. When you use
electric tone, you cannot use voice change.
White light means on
White light means on