Fiio M11 Pro - Using M11 Pro as a Bluetooth Receiver

12
the Bluetooth connection in order to switch the Bluetooth audio code successfully
before reconnecting with the Bluetooth device. (The switching between the three
modes of LDAC can work in real time.)
2. When you turn on the Bluetooth, M11Pro will automatically connect to the latest
available device.
Using M11 Pro as a Bluetooth receiver
When M11 Pro is connected to the new Bluetooth device (such as the mobile phone)
as a Bluetooth receiver, turn on the "Bluetooth decoding mode" in the Bluetooth
settings interface, then the Bluetooth will turned off automatically. Turn on the
Bluetooth again and you are in Bluetooth receive mode now.