Pairing mode I: While the unit is powered on, hold the button ② for about 5s, the
working status indicator will flash red and blue alternately and then the Q5 will skip
the automatic connect-back and go to paring mode directly; By then, you can search
the Q5 on your Bluetooth device and after connected the working status indicator on
the Q5 will stay on constantly in blue;
Pairing mode Ⅱ: When the unit is connected to a Bluetooth device, hold the button
② for about 5s, the Q5 will disconnect from the Bluetooth device and enter pairing
mode again.
When in Bluetooth mode, the other inputs become invalid. You can hold the
"Pause/Play" button for about 2s to exit Bluetooth mode.
4. Low battery and charging indication
Low battery: The working status indicator flashes red twice every 3 seconds to remind
you that the device needs to be recharged; when the device is about to power off
automatically for low battery, the working status indicator will stay on constantly in
red and then goes off after power off;
Charging: The working status indicator pulsates in the color of the corresponding
input methods when charging; if there is no input, it pulsates red;
Charging completed: The working status indicator stays steadily on after a full charge
(if there is no signal input, the light goes off after charging completed).
5. USB DAC
a. When using the device with a Windows computer for the first time, please go to our
website to download the driver and follow the corresponding instructions to install
the driver.
Download link: http://fiio.net/en/supports
b. When using with a MAC OS computer, it doesn't need any drivers. Please choose
the Q5 as the output device.
c. Using the included Lightning-Micro USB cable to connect the Q5 with your
iPhone/iPad/iPod and play the music on your iOS device, then you could better enjoy
your Hi-Res music.
It's recommended to set the system output volume on computer to the max level and
To Next Page
Loading...
