The 3.5mm output port at the top of the X7 may output analog line signal or coaxial digital S/PDIF
signals. This menu item lets you choose between the two.
Allows setting various parameters of the X7 line output, including:
Fixed output level / Adjustable volume: Either one of these may be enabled at any one time.
When Fixed output level is enabled, adjusting volume on the X7 does not affect the line output level.
When Adjustable volume is enabled, you may adjust the line output level with the volume buttons in much
the same way as with the headphone output port, but bypassing the headphone amplifier circuit in both
cases.
In the case of fixed output level, the level may be set to 0dB, -3dB or +3dB relative to a 2V reference
voltage.
EQ enabled: allows you to choose whether to enable equalizer adjustments on the line output.
*This function will implement via future upgrade.
To Next Page
Loading...
