30
VACUUM POINT FOR MANUAL SUCTION CLEANER
OR HYDRAULIC AUTOMATIC CLEANER
10
• Connect one end of the hose to the suction cleaner ;
• Hold the suction cleaner by the handle and insert it into the pool ;
• Gradually insert the hose into the water until the water pushes out
the air (tip : you can fill the hose with water by placing its tip in front
of the return nozzle with the unit running) ;
• Feed the other end of the hose into the skimmer mouth and attach
it to the skim vac plate that seals off the basket ;
• Place the other (plugged) skim vac over the other basket in order to
block suction from the second skimmer and maintain best cleaning
performance ;
• Only use when using the suction cleaner.
The cartridges should be cleaned at least once a week and whenever
the suction cleaner has been used. To clean the cartridges, remove the
baskets, lift out the cartridges and gently hose them down. Refit the
clean cartridges and the baskets.
To Next Page
Loading...