Need help?Do you have a question about the Fimap MR85 B and is the answer not in the manual?
General| Model | MR85 B |
|---|---|
| Category | Scrubber |
| Working Width | 850 mm |
| Solution Tank Capacity | 110 L |
| Traction | Automatic |
| Power Supply | Battery |
| Battery Voltage | 24 V |
| Weight | 270 kg |
| Squeegee Width | 1060 mm |
Instructions for safe operation, referencing a separate document.
Specifications for required batteries and guidelines for maintenance and disposal.
Step-by-step guide for correctly installing batteries in the designated compartment.
Detailed steps for connecting the battery charger to the machine without onboard charging.
Detailed steps for connecting the battery charger to the machine with onboard charging.
Steps to ensure the machine is ready for operation, including tank checks and controls.
Steps to take after completing work, before maintenance.
Safety warnings before performing any maintenance, including key removal and battery disconnection.
Procedure for emptying, cleaning, and securing the recovery tank.
Steps for accessing, cleaning, and reassembling the suction motor filter.
Instructions for cleaning the vacuum tube, squeegee, and rubber blades.
Steps for draining, rinsing, and cleaning the solution tank and its internal filter.
Procedure for removing disc brushes from MR60 B model machines.
Procedure for removing disc brushes from MR 65-75-85-100 B model machines.
Procedure for replacing the front or rear squeegee rubber when worn.
To Next Page
