How to troubleshoot a Fimap Scrubber that won't start?
If your Fimap Scrubber machine doesn't start, first ensure the main switch is set to “I” by turning the key clockwise. Also, check the battery connections inside the machine, referring to the section on inserting batteries. Finally, make sure that the batteries are adequately charged by performing a complete recharge cycle.
Why are the batteries on my Fimap MAXIMA 2017 PLUS Scrubber not charging correctly?
If the batteries of your Fimap Scrubber are not charging correctly, especially in versions with a built-in battery charger, start by ensuring the battery charger cable is securely plugged into both the battery charger and the electrical outlet. Verify that the mains power supply matches the requirements listed on the battery charger plate. In case the LEDs on the battery charger are blinking, consult the battery charger's manual to understand the meaning of these signals during the recharge process.
What to do if there are alarm messages on the Fimap MAXIMA 2017 PLUS control display?
If you see alarm messages on the control display when you switch on your Fimap Scrubber, stop the machine immediately. Contact a technician from a specialized service center for assistance, or press the SOS button if your FFM kit is installed.
General| Traction | Automatic |
|---|---|
| Power supply | Battery |
| Battery voltage | 24 V |
| Battery capacity | 240 Ah |
| Operating time | 4 hours |
| Drive speed | 6 km/h |
| Charging time | 8 hours |
Safety precautions and procedures for recharging the machine's batteries.
Critical safety warnings and precautions before performing maintenance operations.
Essential safety advice and checks before transporting the machine.
Emphasizes operator cooperation and adherence to safety rules for accident prevention.
Details the machine's technical specifications and its intended purpose for floor cleaning.
Procedures for safely moving the machine, including transport onto vehicles.
Essential safety measures to ensure correct and safe operation of the machine.
Information on battery types, maintenance, disposal, and installation procedures.
Detailed steps and precautions for safely recharging the machine's batteries.
Procedure for filling the machine's solution tank with water.
Essential checks and preparations before starting machine operation.
Step-by-step guide to initiating machine operation and selecting work modes.
Detailed operation for the scrubbing-only mode.
Operation details for the combined scrubbing and drying mode.
How to use the emergency switch and interpret alarm messages.
Adjusting rubber blades and replacing squeegee body blades for optimal performance.
Solutions for problems related to the machine not starting or battery issues.
Troubleshooting low autonomy, movement, detergent flow, and cleaning effectiveness.
Solutions for squeegee not drying properly and vacuum system problems.
To Next Page
