Maintenance and Calibration
Remote Controller Calibration
Please try to calibrate the remote controller when you detect inconsistencies between
stick control and drone flying. Select "RC Calibration" in the remote controller menu
Tap" Start" to calibrate the center, do not move sticks Skip to sticks calibration once
the center calibration succeed Skip to dial calibration once the sticks calibration succeed
Note: Please turn off the power of the drone before calibrating the remote controller.
RC calibration is not available in flight
Compass Calibration
If the magnetic field changes, the compass needs to be re-calibrated to ensure flight
safety. If the drone's compass needs to be calibrated, the App will give corresponding
hints and guidance. After entering the flight control menu, please select "compass
calibration", and then calibrate based on prompts on the App.
Note: Please connect the drone before calibration. Compass calibration is not
available in flight.
Gimbal Calibration
Click "gimbal calibration" and enter the calibration page in the gimbal settings menu.
After the drone is placed smoothly, click to start calibration. Do not move the drone
during the calibration process. After the calibration is completed, the App interface
shows "Calibration succeed". If the App interface shows "Calibration failed", please
recalibrate.
Note: Gimbal calibration is not available in flight.
49
To Next Page
Loading...
Need help?
General
