Finn T90 - Page 3

TECHNICAL BULLETIN
No. 2015-0007
Date Released: December 2, 2015
10. Using the “-“ or “+” Soft Keys, adjust the setting to 3000 rpm.
11. Press the left “Exit” Soft Key to return to the Engine Settings Menu.
12. Scroll down with the down arrow key to “Droop/Iso” and press the right arrow to enter.
13. Using the right “Change” Soft Key, cycle the setting to Isochronos.
14. Press the left “Exit” Soft Key to return to the Engine Settings Menu.
15. Scroll down with the down arrow key to “Throttle Type” and press the right arrow to enter.
16. Using the right “Change” Soft Key, cycle the setting to Ramp.
17. Press the left “Exit” Soft Key to return to the Engine Settings Menu.
18. Press the left “Exit” Soft Key to save all settings and return to the Main Menu.
19. Press the left “Exit” Soft Key again to return to the display mode.
20. Turn the key switch to "OFF".
9281 LeSaint Drive Fairfield, Ohio 45014-5457 U.S.A.
(513) 874-2818 800-543-7166 Fax (513) 874-2914
www.finncorp.com
Page 3 of 6