Need help?Do you have a question about the Finn HydroSeeder T60 II and is the answer not in the manual?
Explains safety alert symbols DANGER, WARNING, CAUTION, IMPORTANT, and NOTE.
California warnings about engine exhaust and battery components, including handling precautions.
Checklist for safety checks before starting the engine, including securing the unit and verifying guards.
Guidelines for safe operation, emphasizing PPE, avoiding hazards, and proper vehicle handling.
Safety precautions for applying slurry, including avoiding power lines and handling high pressure.
Procedures and safety precautions for entering the slurry tank, considered a confined space.
Safe practices for refueling and handling batteries to prevent hazards.
Defines hydroseeding as a process for establishing vegetation using water, seed, and mulch.
Explains the mechanism of mixing and applying slurry using dual agitation and mechanical methods.
Specifies the necessary truck capabilities and hitch types for towing the HydroSeeder®.
Describes available attachments like discharge hoses and their impact on operation.
Safety checks to perform before starting the engine, covering unit security and guards.
Detailed inspection of components like fluid levels, lubrication, and general condition.
Explains the function and operation of the three ball valves on the base unit for slurry flow control.
Details the two-valve system for slurry control with the platform/boom option.
Step-by-step guide for starting the engine and preparing the machine for operation.
Information on determining load coverage based on material types and application rates.
Instructions for filling the tank with water and dry materials, including safety precautions.
Steps for planning application, communication, and operator positioning.
Details on choosing the appropriate nozzle based on distance, width, and discharge time.
Techniques for spraying slurry onto the seed bed, including elevation and pattern.
Specific instructions for discharging slurry through hoses, including safety notes.
How to operate the slurry discharge using the platform option boom.
Steps to follow when preparing for the next load of material.
Procedures for cleaning the machine after operation and performing daily maintenance tasks.
Information on the hydraulic system, including fluid type, capacity, and filter requirements.
Visual guide illustrating lubrication points on the machine.
Specifications for pump tolerances and steps to adjust impeller clearance.
Instructions for cleaning the pump and replacing the seal assembly.
Detailed procedure for replacing the pump seal assembly, including parts and steps.
Identifies causes and solutions for foaming, air entrainment, and plugging issues.
Troubleshooting guide for leaks in components and problems with valve operation.
Addresses issues like foaming, lack of distance, and pump wear with corrective actions.
Lists the tools included in the HydroSeeder® kit for maintenance and repairs.
Identifies available seal kits for hydraulic valves, motors, and pumps.
Outlines the warranty period, coverage, limitations, and exclusions for the equipment.
Reiterates California's warnings regarding engine exhaust and battery components.
General| Brand | Finn |
|---|---|
| Model | HydroSeeder T60 II |
| Category | Farm Equipment |
| Language | English |
To Next Page