ELECTRICAL
REQUIREMENTS
This appliance must be supplied with the proper voltage, frequency and connected to an individual
properly
grounded branch circuit. The appliance must also be protected by a circuit breaker or fuse having amperage as
not-
ed on the rating
plate.
We recommend you to have the electrical wiring and hookup of your cooktop connected by a qualied electrician
After installation, have the electrician show you where your main cooktop disconnect is located. Check with
your
local utilities for electrical codes which apply in your area. Failure to wire your cooktop according to
governing
codes could result in a hazardous condition. If there are no codes, your cooktop must be wired and fused to
meet
the requirements of the National Electrical Code, ANSI/NFPA No. 70—Latest Edition. You can get a
copy
by
writing to: National Fire Protection Association Battery March Park Quincy, MA
02269
In Canada, your cooktop must be wired and fused to meet the requirements of the Canadian Electrical
Code.
To Next Page
Loading...