INSTALATION PREPARATION
MODELS AVAILABLE
FI310 Series 11.8” Natural Gas/11.8”
LP
FI320 Series 11.8” Natural Gas/11.8”
LP
FI640 Series 22.8” Natural Gas/22.8”
LP
FI850 Series 22.8” Natural Gas/22.8”
LP
FI950 Series 30.3” Natural Gas/30.3”
LP
These models are factory set for either natural gas or LP gas operation. Be sure to order the
correct
model for
the installation
situation.
PARTS INCLUDED
2 Screws Regulator 2 Hold Down
Brackets
MATERIALS YOU MAY NEED
Joint Sealant Pipe Fittings Shut-Off Valve CSA-Approved Flexible Gas
Line
1/2″ Min. ID, 1/2″NPT Connection, 3-foot Maximum Length (Massachusetts
Only)
NOTE: Purchase new line, do not use previously used exible gas line.
TOOLS YOU WILL NEED FOR INSTALLATION
Pencil Phillips-Head Screwdriver Ruler or Straightedge Safety
Glasses
Saber Saw Pipe Wrench 1/8″ Drill Bit & Electric or Hand
Drill
To Next Page
Loading...