LP GAS CONVERSION
If sold outside the U.S. and
Canada:
WARNING: If you wish to use this product with Liqueed Petroleum (LP) gas containing greater than 10%
bu-
tane,
you must purchase the butane conversion
kit.
SAFTY INFORMATION
The pressure regulator and burner orices are set for natural gas
operation.
To convert this cooktop from natural gas operation to LP operation, the regulator and burner orices must be
convert-
ed.
LP burner orices are attached to the
regulator.
This appliance can be used with Natural Gas or LP/Propane Gas. It is shipped from the factory for use with Natural Gas. A
kit
for converting to LP gas is supplied with your appliance. The kit is marked “FOR LP/PROPANE GAS
CONVERSION”.
When the range is converted for Liquid Petroleum (LP) Gas, the LP gas supply is required to provide a minimum
of
10” to a maximum of 14” water column to the range
regulator.
CAUTION — The cooktop, as shipped from the factory, is set for use with its intended gas. If you wish to use
your cooktop with the alternate gas, you must rst replace the orices and convert the pressure
regulator.
WARNING — This conversion must be performed by a qualied installer or gas supplier in accordance
with
the manufacturer’s instructions and all codes and requirements of the authority having jurisdiction. Failure to
follow
instructions could result in serious injury or property damage. The qualied agency performing this work
assumes
responsibility for the
conversion.
CAUTION — The following adjustments must be made before turning on the burner. Failure to do so
could
result
in serious injury. Be sure pressure regulator has been converted as described in Step
1.
To Next Page
Loading...