Fireco Deafgard - Setting the Time; Time Setting Procedure

Setting the Time
Note: Deafgard operates a 24 hour
clock but does not adjust
automatically for Daylight saving
time.
The Time must be set whenever both
sets of batteries are removed or
replaced.
a. Depress Button 2 TIME SET and
hold it down until only the hour
numeral is shown.
b. Depress Button 3 SCROLL to ad
just to the Hour.
c. Depress Button 2 TIME SET to set
the Minutes.
d. Depress Button 3 SCROLL to
adjust the Minutes.
e. Depress Button 2 TIME SET and
the correct time of day should be
set.
Note: Both Hour and Minutes
should be showing and the centre
colon flashing.
9