12
Wake-up Alarm - Alarm Clock
Deafgard can be used as a wake-up
Alarm as well as a fire alarm for the deaf
and hard of hearing. When the Wake-up
Alarm activates the Pillow Pad will
vibrate constantly and the LCD will
become back-lit.
1. To set the Alarm Clock depress
Button 5 ALARM SET and hold it
until only the hour numeral is shown
on the LCD. Pressing this button
again allows you to set the minute.
2. Use Button 3 SCROLL to adjust the
time. Holding down this button
increments the numeral in 1/2 second
stages.
Once set, the bell symbol will be
displayed on the LCD to show the
Wake-up Alarm function is set and
On.
To turn the Alarm Clock On and
Off press Button 6 ALARM
ON/OFF.
Note: The Strobe LEDs flash only
when the fire message is received.
When activated, the
Wake-up Alarm can be
turned Off by pressing
Button 6 ALARM ON/OFF.
Button 4 MUTE/SNOOZE
will snooze the Wake-up
Alarm for 8 minutes on
first press, 4 minutes on
second and 2 minutes on
third.
To Next Page
Loading...