Firepower FP 125 - Feed Roll Installation & Consumable Guide FP-135; Feed Roll Installation & Consumable Guide FP-165

FIREPOWER FP-125, 135, 165 APPENDIX
Manual 0-5123 A-2 Appendix
Art # A-09027
FEED ROLL INSTALLATION & CONSUMABLE GUIDE FP-135
Wire Feed Rolls & MIG Gun Consumables
Part No.
Description
1444-0427
Wire Feed Roll, Knurle, .023" - .030" /.035" (0.6-0.8mm/0.9mm), Hard/Cored
1444-0050
Nozzle
1444-0025
Contact Tip, .023" (0.6mm)
1444-0026
Contact Tip, .030" (0.8mm)
1444-0027 Contact Tip, .035" (0.9mm) 1444-0489
Gas Diffuser
1444-0741
MIG Gun, Complete Assembly
.030"
0.8mm
Weld Wires
Part No.
Description
1444-0210 1444-0211 1444-0215 1444-0216 1444-0220 1444-0221
ER70S-6 Mild Steel Wire, .023" (0.6mm), 2 lbs. (0.9kg) Spool ER70S-6 Mild Steel Wire, .023" (0.6mm), 11 lbs. (5kg) Spool ER70S-6 Mild Steel Wire, .030" (0.8mm), 2 lbs. (0.9kg) Spool ER70S-6 Mild Steel Wire, .030" (0.8mm), 11 lbs. (5kg) Spool ER70S-6 Mild Steel Wire, .035" (0.9mm), 2 lbs. (0.9kg) Spool ER70S-6 Mild Steel Wire, .035" (0.9mm), 11 lbs (5kg) Spool E71T-GS Flux Cored Wire, .030" (0.8mm), 2 lbs (0.9kg) Spool E71T-GS Flux Cored Wire, .030" (0.8mm), 10 lbs (4.5kg) Spool E71T-GS Flux Cored Wire, .035" (0.9mm), 2 lbs (0.9kg) Spool E71T-GS Flux Cored Wire, .035" (0.9mm), 10 lbs (4.5kg) Spool
1444-0230 1444-0231 1444-0235 1444-0236
The branding size at the end of the feedroll refers to the size nearest to the mark.
Figure A-2: FP-135 Feed Roll and Consumables Chart
Art # A-09028
FEED ROLL INSTALLATION & CONSUMABLE GUIDE FP-165
Wire Feed Rolls & MIG Gun Consumables
Part No.
Description
1444-0427
Wire Feed Roll, Knurle, .023" - .030" /.035" (0.6-0.8mm/0.9mm), Hard/Cored
1444-0050
Nozzle
1444-0025
Contact Tip, .023" (0.6mm)
1444-0026
Contact Tip, .030" (0.8mm)
1444-0027 Contact Tip, .035" (0.9mm) 1444-0489
Gas Diffuser
1444-0741
MIG Gun, Complete Assembly
.030"
0.8mm
Weld Wires
Part No.
Description
1444-0210 1444-0211 1444-0215 1444-0216 1444-0220 1444-0221
ER70S-6 Mild Steel Wire, .023" (0.6mm), 2 lbs. (0.9kg) Spool ER70S-6 Mild Steel Wire, .023" (0.6mm), 11 lbs. (5kg) Spool ER70S-6 Mild Steel Wire, .030" (0.8mm), 2 lbs. (0.9kg) Spool ER70S-6 Mild Steel Wire, .030" (0.8mm), 11 lbs. (5kg) Spool ER70S-6 Mild Steel Wire, .035" (0.9mm), 2 lbs. (0.9kg) Spool ER70S-6 Mild Steel Wire, .035" (0.9mm), 11 lbs (5kg) Spool E71T-GS Flux Cored Wire, .030" (0.8mm), 2 lbs (0.9kg) Spool E71T-GS Flux Cored Wire, .030" (0.8mm), 10 lbs (4.5kg) Spool E71T-GS Flux Cored Wire, .035" (0.9mm), 2 lbs (0.9kg) Spool E71T-GS Flux Cored Wire, .035" (0.9mm), 10 lbs (4.5kg) Spool
1444-0230 1444-0231 1444-0235 1444-0236
The branding size at the end of the feedroll refers to the size nearest to the mark.
Figure A-3: FP-165 Feed Roll and Consumables Chart