Firepower FP-18 Plasma Cutter 20 Service Manual 0-2692
5.3 Power Supply Replacement Parts
Item # Qty Description Catalog#
1 1 Transformer/Inductor (Incl. Chassis) 8-8300
2 1 Cover (incl. Labels) 8-8301
3 1 Control PCB Assembly 9-0003
4 1 Capacitor, AC 120UF, 180V 9-0004
5 1 Wire Harness (not shown) 9-0005
6 1 Relay, DPST, -NO, 25A @ 250V 9-7508
7 1 Fan, 120V 60Hz,Fan 115V 50/60Hz, 95/115CFM 8-3209
8 1 Compressor, Air, 12VDC, 0.5 CFM 9-0010
9 1 Resistor, 0.5ohm, 55 watt, 10%,3/16 Faston 9-0011
10 1 Resistor, 1Kohm, 55 watt, 5%,3/16 Faston 9-0012
11 1 Work Cable, 15 ft. (4.57 m) w/Red Handles 9-0013
12 1 Input Power Cable, 6.5 ft. min. (2 m), 16/3 w/molded plug 9-0014
13 1 ON/OFF Switch:
ON/OFF Switch , DPST, 125V 15A, RED NEON (5 Prongs) 9-0015
ON/OFF Switch, DPST, 125V 22A, RED NEON (4 Prongs) 9-0021
14 1 CD Transformer/Ferrite Core Assembly 9-0018
15 2 Bridge Rectifier 7-3345
16 1 Handle, Molded 9-8115
To Next Page
Loading...
