FIREWOLF FW-C2Z - Main Fire Alarm Module Terminal Connections; Fig.11: Main Fire Alarm Module Terminal Connections

To Next Page

To Previous Page

Page 16 of 36

Fig.11: Main Fire Alarm Module Terminal Connections

7.2 MAIN FIRE ALARM MODULE TERMINAL CONNECTIONS

Wire devices to terminals as shown. See wiring tables and Appendix A for compatible devices and Appendix C for specifications.

Caution: Do not exceed power supply ratings: FW-C2Z, FW-C4Z, total current for Notification Circuits is 2.4 A max.

FW-C4EZ, total current for Notification Circuits is 5 A max.

Main Page

Default Chapter2
- Table of Contents2
1 Introduction4
- Overall Features4
2 General Notes5
3 System Components6
- Models7
- Accessories7
4 MECHANICAL INSTALLATION and DIMENSIONS8
Fig.2: FW-C4EZ Enclosure Installation and Dimensions9
Fig.3: FW-C2Z, FW-C4Z Module Mounting Locations10
5 Module Mounting Locations10
Fig.4: FW-C4EZ Module Mounting Locations11
Fig.5: Main Fire Alarm Module12
- ZONE EXPANSION MODULE (Model FW-EZM4)13
- RELAY MODULES (Models FW-RB4 or FW-RB8)13
6 Module Settings12
- Main Fire Alarm Module12
Fig.6: FW-EZM4 Zone Expansion Module13
Fig.7: FW-RB4 or FW-RB8 Relay Module13
- DACT / DIALER MODULE (Model FW-DACT)14
- POLARITY REVERSAL and CITY TIE MODULE (MODEL: FW-RPM)14
Fig.8: FW-DACT Dialer Module14
Fig.9: FW-RPM City Tie Module14
Fig.10: General Field Wiring Considerations15
- Main Fire Alarm Module Terminal Connections16
7 Field Wiring15
- General Field Wiring Considerations15
Fig.11: Main Fire Alarm Module Terminal Connections16
Fig.11A:main Fire Alarm Module Terminal Connections (Continued)17
- Zone Expansion Module (Fw-Ezm4) Terminal Connections18
Fig.12: FW-EZM4 Zone Expansion Module Terminal Connections18
- RELAY MODULE ( FW-RB4 or FW-RB8) TERMINAL CONNECTIONS19
Fig.13: FW-RB4 / FW-RB8 Relay Terminal Connections19
- Dact / Dialer Module (Fw-Dact) Terminal Connections20
- POLARITY REVERSAL and CITY TIE MODULE (MODEL: FW-RPM) TERMINAL CONNECTIONS20
Fig.14: FW-RPM Polarity Reversal and City Tie Module Terminal Connections20
- Power Supply Connections21
Fig.15: Power Supply Connections21
- Wiring Tables22
Fig.16: WIRING TABLE for INITIATING CIRCUITS22
Fig.17: WIRING TABLE for NOTIFICATION CIRCUITS22
8 System Checkout23
- Before Turning the Power "On23
- Power-Up Procedure23
- Troubleshooting23
Fig.18: Indicators and Control Location24
- Indicators25
- Controls26
- Operation26
- Circuit Types27
9 Indicators, Controls, & Operation24
10 System Configuration28
11 Walk Test Operation30
Appendix "A" - Compatible Devices31

FIREWOLF FW-C2Z - Main Fire Alarm Module Terminal Connections; Fig.11: Main Fire Alarm Module Terminal Connections

Table of Contents