Once the desired number has been reached, press
to start the operation.
If filling needs to be interrupted in advance, press
again or turn the valve
anticlockwise.
9.2. Manual filling
Repeat the same operations described for filling with litre gauge until the selection of
hot/cold water.
Keep
pressed to fill with the desired amount of water. Release the pushbutton to
interrupt filling.
If the valve is not in the right position, the following message will appear when filling:
Make sure that the valve is fully turned clockwise.
10.0. How to move the vat
The cooking vat can be tilted by pressing
. Tilting is performed by pressing the
button, which means that when the pushbutton is released the vat will stop moving. The
same applies to the pushbutton
to be used to make the vat return to its horizontal
position.
Since tilting inhibits heat, whenever the vat is not in a perfectly horizontal position, the
following message will appear on the display:
VAT OUT OF POSITION
**********************************
VALVE OUT OF POSITION
**********************************
To Next Page
Loading...
