Keep the pushbutton
pressed until the end of vat movement to re-enable all panel
functions.
If the vat cannot be moved different types of messages may appear on the display:
Which means that the lid is closed or not completely open or
This means that the water filling tap must be turned fully into the right position.
11.0. How to set Delayed Start
This function is used to set the beginning of a cooking phase programming its type,
temperature, start-off date and time.
To select this function, the appliance must be in standby mode (the led of the pushbutton
must be off and only the date and timed must appear on the display)
Press the pushbutton
To Next Page
Loading...
Need help?
General
