Firstech FLEX 2 User Manual

16
Remote Start Shutdown Error Codes
If the remote start sequence has been completed and the vehicle shuts down, the vehicle’s parking lights
will flash 4 times, pause then flash again with the error code. Tap the Start on 2 Way remotes to initiate
the shutdown error codes. On 1 Way remotes, hold the Trunk and Start buttons together for 2.5 seconds.
Number of
Parking Light
Flashes
Remote Start Shutdown Error
1
Lost engine sensing signal
2
Lost emergency brake signal
3
Foot brake triggered
4
Hood pin triggered
Alarm Diagnostics
While the alarm is armed, the LED will blink slowly. While the siren is going off, the LED will indicate
which specific zone was triggered.
Upon disarming the alarm after it has been triggered, the amount of siren chirps will indicate the specific
zone.
LED Flash Alarm Trigger
2 Flashes
Door(s) Triggered
3 Flashes
Shock Stage 1
4 Flashes
Shock Stage 2
5 Flashes
Tilt
6 Flashes
Ignition On
7 Flashes
Hood Triggered
8 Flashes
Trunk Triggered
9 Flashes
Aux Sensor Stage 1
10 Flashes
Aux Sensor Stage 2
Number
of Chirps
Situation
4
Optional Sensor Triggered
5 2
nd
Shock Triggered
6 Door/Hood/Trunk/Key Triggered

Firstech FLEX 2 Specifications

General

Brand	Firstech
Model	FLEX 2
Category	Automobile Accessories
Language	English