EasyManuals Logo
Home>Firstech>Automobile Accessories>FLEX 2

Firstech FLEX 2 User Manual

Firstech FLEX 2
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Half second Unlocks doors and/or disarms alarm. Twice
2.5 seconds Resets the run time or turbo timer Three
Half second
Aux 1. Triggers the auxiliary 1 output
(most commonly used for rear defrost or
window roll-down).
Once
2.5 seconds
Trunk release. Triggers the trunk release
output and opens the vehicle’s trunk.
Twice
Half second
Aux 2. Triggers the auxiliary 2 output
(most commonly used for rear defrost or
window roll-down).
Once
2.5 seconds
Activates the remote start. Repeat and
remote start will shut off. Will activate
Stop and Go Mode if held when vehicle is
running with the key.
Once On /
Twice Off
Half second
Turns siren chirps on/off (Note: With the
siren chirps off, it will still sound in the
event the alarm is triggered).
Once On /
Twice Off
2.5 seconds
Option programming menu 1 - Installers
Only.
Once
Half second
Valet mode (see Valet Mode Section for
details)
Once On /
Twice Off
2.5 seconds
Hold these two buttons to turn your shock
or FT-DAS on or off
Once On /
Twice Off
Half second
Drive lock. Activates ignition controlled
door locks.
Once On /
Twice Off
2.5 seconds
Option programming menu 2 - Installers
Only.
Once
Half second
Activates passive arming (vehicle will
arm/lock 30 seconds after the vehicle is
disarmed)
Once On /
Twice Off
Half second
Activates timer start mode. Timer start
mode has multiple programmable
settings: duration settings, temperature
settings and self start settings.
Once On /
Twice Off
2.5 seconds
Puts your remote into 2
nd
Car Mode. You
can control another vehicle with the same
remote as long as it has the same RF Kit
installed.
Once On /
Twice Off
Half second
Activates the built in Turbo Timer function.
Additional installation is required when
using this feature on automatic
transmission vehicle’s.
Once On /
Twice Off
2.5 seconds
Car Check (updates vehicle status on
remote) / Secure Auxiliary
Twice
Remote Option Menu Table
Feature
Turns Feature
On or Off
Button
Duration
Remote
Chirp(s)
Function / Description
Silent Mode
2.5
seconds
One Off
LED’s will change to red. Repeat to turn silent mode off.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Firstech FLEX 2 and is the answer not in the manual?

Firstech FLEX 2 Specifications

General IconGeneral
BrandFirstech
ModelFLEX 2
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals