Firstech FLEX 2 User Manual

6
Remote LED Functions
Your remote will communicate to and from your vehicle while in range. The unique icon LED design will
display LED’s indicating lock/unlock status, remote start confirmation, remaining run time and much
more.
1 Way Remote Button Functions
Button Duration
Additional
Programming
Required
Function / Description
Half second no Locks doors and/or arms alarm.
3.5 seconds no Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn).
Half second no Unlocks doors and/or disarms alarm.
Half second no
Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window
roll-down).
2.5 seconds no Trunk release. Triggers the trunk release output and opens the vehicle’s trunk.
Half second no
Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window
roll-down).
2.5 seconds no Activates the remote start. Repeat and remote start will shut off.
Half second no
Turns siren chirps on/off (Note: With the siren chirps off, it will still sound in the event the
alarm is triggered).
2.5 seconds no Option programming menu 1 - Installers Only.
Half second no Valet Mode (see Valet Mode Section for details)
2.5 seconds no Turns the shock sensor on/off. (Alarm or Alarm/Starter systems only)
Half second yes Drive lock. Activates ignition controlled door locks.
Event
LED Icon
LED Duration
Chirp(s)
Runtime Remaining:
100 Percent
Once every 5 seconds Five times
Runtime Remaining:
75 Percent
Once every 5 seconds N/A
Runtime Remaining:
50 Percent
Once every 5 seconds N/A
Runtime Remaining:
25 Percent
Once every 5 seconds N/A
All command
confirmations
Once or Twice depending on function
Once or Twice
depending on function
All error
confirmations
The icon LED’s will blink according to
which button(s) caused the error.
Three chirps
Low Battery Warning Fade

Firstech FLEX 2 Specifications

General

Brand	Firstech
Model	FLEX 2
Category	Automobile Accessories
Language	English