Need help?Do you have a question about the Fischer Panda AGT 6000 PVMV-N and is the answer not in the manual?
General| Model | AGT 6000 PVMV-N |
|---|---|
| Type | Portable Generator |
| AC Output | 6000 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Fuel | Diesel |
| Starting System | Electric Start |
Provides general safety guidelines for operating the AGT generator, emphasizing precautions for energized systems.
Details specific safety measures and precautions for handling batteries, including fire protection.
Describes the information found on the generator's type plate for identification and specifications.
Provides detailed views and identification of the genset's components from various angles.
Offers in-depth views and descriptions of various operational units and their components.
Covers essential operating procedures, including pre-heating, starting, and stopping the generator.
Details general instructions and specific connections required for generator installation.
Provides instructions for installing the 12V and 24V DC systems for the generator.
Explains the procedure for connecting the starter battery block to the generator.
Information regarding the installation and use of the remote control panel.
Details on the Voltage Control System (VCS) and its function for generator voltage.
Information about the Battery Monitor, its function, and connection.
Details on the temperature-controlled speed control for DC fans.
Describes the procedure for performing a ground insulation test on the electrical system.
Covers general instructions, radiator connection, positioning, and coolant specifications.
Provides guidance on connecting the exhaust system for roof outlet or vehicle mounting.
Outlines essential maintenance checks before starting and monthly tasks.
Details the procedure and requirements for oil circuit maintenance and filter changes.
Explains the process for bleeding air from the fuel system.
Provides specific instructions for ventilating the coolant circuit of the generator.
Describes the steps for accessing and replacing the air filter.
Details the procedure and considerations for changing the V-belt.
Discusses the causes and effects of generator overloading and how to prevent damage.
Explains methods for testing generator stator windings for shorts and resistance.
Covers common starting issues related to the fuel solenoid valve and bypass switch.
Provides a reference table for diagnosing and resolving generator failures.
Presents a detailed schedule of maintenance tasks based on operating hours.
Provides information on engine oil classification and coolant specifications.
Offers solutions for common generator issues like low/high voltage and starting problems.
Lists detailed technical specifications for the generator's engine.
Presents detailed technical specifications for the generator's electrical components.
Provides dimensional drawings and measurements of the generator capsule.
Lists available versions of the VCS-AGT-U/I system with their set points.
Explains the general working and safety instructions for the voltage control system.
Highlights critical safety instructions for the battery monitor and system.
Provides a concise overview of the battery monitor's automatic monitoring function.
Describes how the battery monitor operates, including undervoltage and charge voltage detection.
Lists technical specifications, settings, and ratings for the battery monitor.
Mentions related accessories such as the Relay switch RE0003 for the battery monitor.
Introduces the DC fan controller for continuous speed regulation based on temperature.
Presents technical data, ratings, and characteristics for the DC fan controller.
Provides instructions for cleaning and replacing parts on the generator, emphasizing safety.
Gives an overview of the remote control panel's functions and monitoring capabilities.
Details the optional automatic start feature and its necessary components.
Covers operating procedures for the remote control panel, including pre-heating and starting.
Information on the optional slave panel and its connection to the main panel.
Details the use of the combo adapter board for slave panel and automatic start.
Presents wiring diagrams for the remote control panel and its connections.
To Next Page