Need help?Do you have a question about the Fischer Panda 8000i PMS and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Cooling System | Water-cooled |
| AC Output | Single Phase |
| Voltage Options | 230 V |
| Starting System | Electric Start |
| Phase | Single Phase |
| Sound Level | 64 dB(A) at 7 m |
| Max Power | 8.0 kW |
| Noise Level | 64 dB(A) at 7 m |
General safety instructions, warnings, and prohibitions for safe operation and maintenance.
Detailed views and labels of the generator's external components from different angles.
Explains the various systems of the generator, including cooling, fuel, air, exhaust, electrical, and lubrication.
Refers to the iControl panel manual for operating instructions and checks.
Details critical safety warnings and precautions for generator installation.
Provides guidelines on selecting an appropriate and safe location for generator installation.
Illustrates and describes the electrical, fuel, and cooling water connections for the generator.
Step-by-step instructions for installing the raw water cooling system components.
Details the installation process for the fresh water cooling system.
Instructions for installing the water-cooled exhaust system, including waterlocks and hoses.
Explains the importance and installation procedures for the waterlock to prevent water ingress.
Instructions for installing the fuel system components, including filters and pumps.
Guidelines for installing the DC electrical system, including starter batteries.
Instructions for installing the AC system, including the PMGi inverter.
Details safety warnings and precautions related to generator operation.
Provides general guidance on operating the generator, including low temperatures and load management.
Details safety warnings and precautions to be followed during maintenance work.
Step-by-step instructions for checking the engine oil level using the dipstick.
Detailed procedure for changing the engine oil and oil filter.
Instructions for checking the condition, electrolyte level, and density of the starter battery.
Procedure for bleeding air from the fuel system.
Step-by-step guide for replacing the electric starter motor.
Detailed procedure for replacing the DC alternator.
Instructions for replacing the oil pressure switch.
General safety warnings and precautions relevant to generator failure troubleshooting.
Safety instructions specific to the operation and installation of the Panda iControl2 system.
Instructions for operating the Panda iControl2 system, including panel functions and modes.
Crucial safety warnings and procedures for operating the iControl2 controller and connected generator.
Details the operation modes of the iControl2 controller, including start-up and running states.
Critical safety warnings and precautions for performing the installation.
Describes how error messages are generated, their impact, and examples of fault displays.
Datasheet information for the PMGi 8000 and PMGi 10000 inverters.
Essential safety instructions for using the inverter, including cover removal and electrical hazards.
To Next Page