Need help?Do you have a question about the Fischer Panda 5000i.Neo PMS and is the answer not in the manual?
General| Model | 5000i.Neo PMS |
|---|---|
| Fuel Type | Diesel |
| Weight | 97 kg |
| Dimensions (L x W x H) | 610 x 460 x 510 mm |
| Noise Level | 54 dBA (at 7m) |
| Start System | Electric start |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Cooling System | Water-cooled |
| Phase | Single-phase |
General safety warnings and hazard symbols for operation and maintenance.
Comprehensive safety guidelines and precautions for operating the generator.
Safe procedures for handling fuels and lubricants to prevent hazards.
Measures for handling exhaust fumes and preventing fires.
Precautions for avoiding burns and battery explosions during operation.
Warning to keep body parts away from moving generator components.
Specific safety instructions and hazards related to generator operation.
Guidelines for protective conductors and potential equalization.
Procedure to disconnect all loads before working on the generator.
Essential safety precautions when handling batteries.
Critical safety warnings and hazard notes for the installation process.
Guidelines for selecting an appropriate installation location for the generator.
Instructions for making electrical, fuel, and cooling water connections.
Detailed steps for installing the raw water cooling system.
Instructions for installing the water-cooled exhaust system.
Guidance on the correct installation and positioning of the waterlock.
Steps for installing the generator's fuel system components.
Instructions for installing the generator's DC electrical system.
Guidelines for installing the generator's AC electrical system and safety measures.
Required qualifications for performing maintenance tasks.
Safety warnings and hazards associated with maintenance and potential failures.
Pre-operation checks to ensure the generator is ready for use.
Schedule and procedures for changing the engine oil.
Procedure for checking the engine oil level.
Step-by-step guide for replacing engine oil and oil filter.
Procedure for replacing the fuel filter.
Procedure for replacing the air filter.
Step-by-step guide for replacing the impeller in the raw water pump.
Essential safety precautions for the operation and installation of the PMGi inverter.
Configuration settings for using the PMGi inverter with iGenerators.
Step-by-step instructions for mounting and installing the PMGi inverter.
Guidelines for making electrical connections to the PMGi inverter.
Procedure for connecting the PMGi to a system protected by an RCD.
General safety warnings and precautions for operating the Panda iControl2 system.
Mandatory safety step: disconnect the battery before any work on the generator.
Procedure for connecting and using an emergency stop with the iControl2.
Critical safety warnings and hazard notes specific to the installation process.
To Next Page