11
Figure 25
z
Extend the house duct down to
connect to the exhaust adapter.
Seal exhaust duct joints using
duct tape. See Figure 25.
z
Install the grease filters. Refer to
the USER GUIDE for installation
steps.
z
Plug in the power cord.
CONNECTING DUCTWORK CHECK LIST FOR OPERATION
1. Make sure the unit has been installed according to all of the Installation Instructions, the
TOP CABINET TEMPLATE and WALL TEMPLATE.
2. Remove all packing material from the oven.
3. Plug in the power cord.
4. Read the
USER GUIDE.
5. Keep the
INSTALLATION GUIDE for the local electrical inspector’s use.
To Next Page
Loading...
