16
US
CA
COOKTOP USE
CONTROL KNOBS:
The burners have an infinite number of heat settings and there are no fixed positions on the control knobs be-
tween HI and SIM (with the exception of LO). To light a burner, push its control knob in and rotate counterclock-
wise to HI. You will start hearing the igniters click and the burner should light immediately. To use, turn the knob
to the desired setting. When you have finished using the burner, make sure you turn its control knob clockwise
back to OFF.
COOKING UTENSILS:
For best results we recommend using professional cookware. If using regular cookware, be very careful if the pans
have plastic handles, as these large professional size burners can flame up on the outside of the pan and melt or
bubble the handles.
THESE GRAPHICS
SHOW BURNER
LOCATION:
REAR LEFT BURNER
BURNERS:
The cooktop has burners with different maximum outputs. All burners have exceptionally low simmer capabilities
(see the tables below). All the burners have electronic spark re-ignition to eliminate continuously burning pilot; if
the flame is blown out, it will automatically relight.
TOP VIEW OF KNOB
CDU-365
CDU-304
Burner
Location
MAX. Btu/hr
LOW Btu/
hr
SIMMER
Btu/hr
NAT LP NAT & LP NAT & LP
1, 2, 4, 5 11,000 10,000 3,000 1,200
3 17,500 15,000 3,000 1,200
Burner
Location
MAX. Btu/hr
LOW Btu/
hr
SIMMER
Btu/hr
NAT LP NAT & LP NAT & LP
1 10,000 10,000 3,000 1,200
2, 3 11,000 10,000 3,000 1,200
4 15,500 15,500 3,000 1,200
4
5
3
1
2
4
3
1
2
To Next Page
Loading...
Need help?
General
