What happens if there's a power failure during a Fisher & Paykel DD24DCB7 cycle?
If there is a power outage during a wash cycle of your Fisher & Paykel Dishwasher, wait until the power resumes. The cycle will restart from the same point in the wash program.
Why is my Fisher & Paykel DD24DCB7 foaming excessively?
If your Fisher & Paykel Dishwasher is experiencing excessive foaming, it could be due to several reasons. Ensure you are using the correct amount of detergent, referring to the ‘Wash programs and detergent quantities’ section or the detergent manufacturer's instructions. Too much egg in the wash load can also cause foaming, so try increasing the detergent amount. Additionally, check your rinse aid settings; if it's too high, decrease it. Lastly, make sure the rinse aid dispenser plug is closed tightly, with its hand grip pointing straight ahead.
Why is my Fisher & Paykel DD24DCB7 Dishwasher making excessive noise?
If your Fisher & Paykel Dishwasher is making excessive motor noise, ensure that the filter plate and/or spray arm is correctly placed. If the dishwasher hasn't been used for a while, pour 3 cups of water into it.
Why is my Fisher & Paykel Dishwasher not dispensing detergent?
If your Fisher & Paykel Dishwasher isn't dispensing detergent, it might be because the detergent dispenser was wet when loaded. Clean the dispenser and make sure it's dry before adding detergent.
How to fix unclean dishes in my Fisher & Paykel DD24DCB7?
If your Fisher & Paykel Dishwasher isn't cleaning dishes properly, several factors could be the cause. First, ensure you're using a wash program suitable for the load; check your ‘Quick start guide’ for guidance. Heavily soiled dishes may need soaking beforehand. Make sure the spray arm can rotate freely, without obstructions. Overloading or incorrect loading can also lead to unclean dishes, so refer to the loading section. Verify that the filter plate and drain filter are correctly inserted, consulting the ‘User maintenance instructions’ if needed. Place detergent in the large compartment, following the ‘Adding detergent’ section. Scrape off excess food before loading. Use detergents specifically for automatic dishwashers, referencing ‘Adding detergent’ for suitable options, and ensure yo...
General| Installation Type | Built-in |
|---|---|
| Energy Star Rated | Yes |
| Noise Level | 44 dBA |
| Finish | Stainless Steel |
| Wash Programs | 6 |
| Control Type | Electronic |
| Delay Start | Yes |
| Half Load Option | Yes |
| Drying System | Condensation |
| Product Type | Dishwasher |
| Drawer Capacity | 7 |
| Wash Modifiers | Half Load |
| Programs | Heavy, Medium, Normal Eco, Delicate, Rinse, Quick |
Details fuse replacement and plug/socket compatibility for UK and Ireland.
Essential safety precautions for operating the dishwasher.
Safety advice for installation, grounding, and power supply.
Safety measures for daily use, upkeep, and remote controls.
Safety for remote controls and compliance with standards.
Guidance on washing different types of tableware.
Details on cutlery baskets, containers, and tablet tray.
How to adjust racks, tines, and use clips for optimal loading.
Best practices for loading dishes to ensure effective washing.
Explains water hardness and its effects on dishwashing.
Guide to setting up the water softener based on local water hardness.
Instructions for filling and maintaining the salt reservoir.
Guides detergent amounts for different wash programs and water hardness.
Guidance on suitable detergents and how to fill the dispenser.
Lists unsuitable detergents and notes on using tablets.
Instructions for refilling and adjusting rinse aid levels.
Covers surface care, holiday prep, and initial cleaning steps.
Covers surface care, holiday prep, and cleaning for specific models.
Table of issues like unclean dishes, foaming, leaks, and their resolutions.
How to know if there's a fault and initial steps to take.
Flowchart for addressing 'U' and 'E' codes in classic dishwashers.
Flowchart for addressing faults in designer dishwashers.
Flowchart for faults in integrated models with badges.
Flowchart for faults in models with remote controls.
Details wash cycles, temperatures, and durations for US/Canada models.
Details wash cycles, temperatures, and durations for NZ/Australia models.
Details wash cycles, temperatures, and durations for GB/Ireland models.
Parameters used for testing DD24 models against standards.
Parameters used for testing DD36 models against standards.
Parameters used for testing DD60 models against standards.
Parameters used for testing DD60 models against standards.
Parameters used for testing DD90 models against standards.
Advice on self-checks before contacting customer support.
To Next Page
