Fisher & Paykel DD24SCX7 Installation Instructions

19
INTEGRATED MODELS ONLY - INSTALLING THE FRONT PANEL
ADJUST PANEL HEIGHT TO ALIGN THE CABINETRY GAPS
22
With the front panels fitted, insert an appropriately
sized Philips screwdriver into the hole above the door
pin and rotate the panels up or down to align the gaps
in your cabinetry.
Repeat on the other side if necessary.
The panel has a maximum travel of ⁄” (2 mm) up or
down.
Important!
Ensure that you maintain a minimum of ⁄” (2 mm)
ventilation gap below the panel.
+ or - ⁄” (2 mm)

Fisher & Paykel DD24SCX7 Specifications

General

Brand	Fisher & Paykel
Model	DD24SCX7
Category	Dishwasher
Language	English