Fisher & Paykel DD60SCX7 Installation Instructions

22
THERE ARE TWO DIFFERENT PLUMBING AND DRAINAGE OPTIONS. CHOOSE WHICH IS MORE SUITABLE.
23
1
3
2
750-882.5 mm
1
2
38 mm
max.
120
mm
750-882.5 mm
**
3 4
5
If space is limited
for fixing, push
hose through drain
hose support
to required height
If space is limited
for fixing, push
hose through drain
hose support
to required height
Dishwasher using sink trap with drain hose joiner
750 - 882.5 mm
750 - 882.5 mm
min. R 200 mm
min. R 200 mm
Supplied drain hose joiner
19 mm waste tee
HIGHLOOP min. 150 mm
Ensure drain hose is routed straight
to joiner. Remove excess drain hose
material if necessary.
Do not shorten the inlet hose.
Dishwasher and Standpipe Ø 38 mm
Ensure the
supplied
rubber
washer is
fitted inside
the coupling.
Tighten coupling with spanner.
180
o
No leaks!
CONNECT INLET HOSE TO COLD WATER PLUG PRODUCT IN
24 25
1 2
24 24see see
Important!
Do not connect the
drain hose to a waste
disposal unit, as this
type of connection may
lead to a blockage in
the drain hose.

Fisher & Paykel DD60SCX7 Specifications

General

Brand	Fisher & Paykel
Model	DD60SCX7
Category	Dishwasher
Language	English