Need help?Do you have a question about the Fisher & Paykel DE5060G1 and is the answer not in the manual?
General| Dryer Type | Vented |
|---|---|
| Number of Drying Programs | 6 |
| Control Type | Electronic |
| Width | 600 mm |
| Height | 850 mm |
| Number of Programs | 6 |
| Delay Start | Yes |
| Child Lock | Yes |
| Drum Light | No |
| Reverse Tumbling | Yes |
| Filter Type | Lint Filter |
| Energy Rating | 2 Stars |
Ensure mains power is disconnected before servicing the dryer to avoid electric shock.
Use an anti-static strap for protection when servicing electronic components.
Ensures optimum efficiency and safety by detailing correct external and internal venting procedures.
Details the essential installation test cycle to verify correct dryer functionality before first use.
Outlines testing procedures, wiring colours, and resistance readings for key dryer components.
Step-by-step guide for removing the dryer's control panel.
Detailed steps for removing the dryer drum, including belt and wiring disconnection.
Guide for replacing the front drum bearing, advising to replace all bearings at once.
Steps for replacing the rear drum bearing, involving removing the back panel and flange shaft nut.
Procedure for removing the main motor, including cradle and retaining clips.
Instructions on how to enter and use the dryer's self-diagnostic mode.
Lists specific fault codes (Err3, Err4, Err9) and their associated temperature conditions.
Electrical schematic illustrating the wiring for DE7060P and DE6060P dryer models.
Electrical schematic illustrating the wiring for DE7060G, DE6060G, and DE5060G dryer models.
Addresses problems like slow drying, unsatisfactory results, and clothes getting too hot or damaged.
To Next Page