12
Electronic and Auto-timer 4.5 kg dryers
It is important to clean the lint filter regularly,
as the lint produced in the drying process
can become a fire hazard if it is allowed to
accumulate in or around your dryer.
The lint filter is located in the door opening.
1
Remove the lint filter, open it out and wipe
clean with your hand.
2
Close the lint filter and place it back in the
opening.
Auto-timer 3.5 kg dryer
The lint filter is located on the door of the dryer
behind the directional outlet grill.
1
To remove the outlet grill grasp the hub in the
centre of the grill and pull. Wipe the filter clean
with your hand.
2
To replace the grill, locate the hub over the boss
in the centre of the door and push firmly.
Note: do not clean your lint filter by vacuuming
or wetting it, as this may block the fine pores
essential for maximum airflow.
Cleaning the lint lter
Fig. 13 Lint filter – 4.5 kg dryers
Fig. 14 Lint filter – Auto-timer 3.5 kg dryer
To Next Page
Loading...
