Fisher & Paykel GC600 User Manual

Gas Cooktops
Models
GC600
GC600W
GC600F
GC600WF
GC600WFC
GC600QJET
GC900
GC900WFC
GC9002WFC
GC900QJET
GC9002QJET
GC36
GC36WAC
599001

Fisher & Paykel GC600 Specifications

General

Brand	Fisher & Paykel
Model	GC600
Category	Cooktop
Language	English

Summary

Specifications

Burners

General Warning

Wiring Diagram

Replacement of Burner Orifice & Low Setting

Minimum Setting or Turn Down

Conversion to Different Gas Type

Replacement & Servicing of Electronic Ignition

To Replace an Electrode

To Replace Ignition Box

To Replace the Microswitch Loom (GC600, GC600W and GC36 Only)

Replacement & Servicing of Flame Failure

To Test Flame Failure

Method for testing the flame failure safety device to ensure it functions correctly.

To Replace a Thermocouple

Gas Valves

To Change a Gas Valve

Detailed steps for safely removing and replacing a gas valve on the cooktop.

To Re-Grease Gas Valves

Problem Solving (excluding Auto Reignition)

Flame Doesn't Stay When Gas Valve is Released

Diagnosing why the flame extinguishes after the control knob is released.

Problem Solving Auto Reignition

Gas Doesn't Light - No Spark

Troubleshooting for auto-reignition systems when no spark is generated.

Gas Doesn't Light - Spark but no Ignition

Troubleshooting for auto-reignition systems when spark is present but ignition fails.

Sparking Continuously after Ignition

Diagnosing why the ignition system continues to spark after the burner is lit.

Flame Goes Out on Low Setting

Troubleshooting steps when the flame extinguishes on the lowest burner setting.

Flame is Distorted or Large and Yellow