15
The micro switches are activated by a cam, which
tells the PCB when the door is ‘unlocked’ or ‘locked’.
The board needs to see a ‘locked’ signal for the
pyro cycle to work and an ‘unlocked’ signal for the
cooking functions to work. The stoppers are used
to stall the motor to force it to change direction.
The start-up direction of the motor is random so
if it starts in the wrong direction the stoppers are
used to reverse it to go the right way.
Voltage: 220-240 V / 50 Hz
Resistance: 100 M Ohms
Wattage: 4 watts
Max operating temp : 120 deg C
3.5 Door Lock
To Next Page
Loading...
