Levelling the cooker
Using the supplied
adjustable feet is
MANDATORY. For safety
reasons and to ensure
adequate ventilation, the
cooker chassis MUST NOT
sit directly on the floor, a
plinth, or other support
surface.
To fit the adjustable feet:
1. Rest the rear of the cooker on a piece of
packaging, exposing the base for fitting the
feet.
2. Screw the four feet to the cooker.
3. Stand the cooker and level it by screwing or
unscrewing the feet with an adjustable spanner.
Use the supplied nuts if necessary. See Figs.
16a- 16d.
Fig. 16a Fitting the adjustable feet (supplied with the
cooker in the feet kit)
https://producthelp.fisherpaykel.com/au/Cook/Freestanding_Cookers/Electric/OR60SDBSX2/User_Guide_OR60SDBSX2_(59…
Updated: Fri, 08 May 2020 08:21:57 GMT
Powered by
2
To Next Page
Loading...
