EasyManua.ls Logo

Fisher & Paykel OR90SDBGFPX1 - Before using your cooktop; Using the gas burners

Fisher & Paykel OR90SDBGFPX1
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
, but never between
and
(OFF) or between
and
(OFF).
Before using your cooktop
Before using your new cooktop, please:
Read this user guide, taking special note of the ‘Safety and warnings’ section.
Make sure all burner control dials are turned off.
Turn the power to the cooker on at the wall.
Using the gas burners
1. Choose the control dial for the burner you want to use.
2. Semi-rapid and triple-ring burners: press the dial in gently and turn it anticlockwise to the
position. The ignitors on all the burners will spark.
Dual burner: press the dial in gently and turn it anticlockwise to the
position (to ignite the inner and outer crowns) or press the dial it gently and turn it clockwise to the
position (to ignite the inner crown only). The ignitors on all the burners will spark.
Hold in the dial for approximately 10 seconds after the burner has lit. Releasing the dial too soon will extinguish
the flame.
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Dual_Fuel/OR90SDBGFPX1/User_Guide_OR90SDBGF…
Updated: Wed, 12 Apr 2023 03:12:03 GMT
Powered by
3

Other manuals for Fisher & Paykel OR90SDBGFPX1

Related product manuals