Fig. 5 Accessing the anti-tilt bracket by removing the drawer
a. Slide out the drawer completely.
b. Press the lever of the left guide rail down and pull the lever of the right guide rail up.
c. Holding the levers, disengage and remove the drawer.
5. If fitted, remove the kickstrip (see ‘Levelling the cooker’). Fix the restraining plate by sliding it into place and
securing it with the fixing screw and washer supplied. See Fig. 6.
Fig. 6 Fixing the restraining plate
6. Replace the drawer (Fig. 7):
Fig. 7 Replacing the drawer
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Induction/OR90SDBSIX2/User_Guide_OR90SDBSIX2/02_Installation_instructions
Updated: Fri, 08 Mar 2019 10:03:53 GMT
Powered by
6
To Next Page
Loading...
