Cleaning the stainless steel surround strip
To remove fingerprints and other marks, wipe with a clean damp cloth and dry with a lintfree cloth.
Cleaning the inside of your oven
• Do not use oven cleaner on catalytic panels. Remove the catalytic panels if additional oven cavity cleaning is
required. See ‘Fitting and removing catalytic panels’
• Do not use abrasive cleaners, cloths or pads to clean the enamel.
• To make cleaning easier, you can remove the side racks, the oven door, and the fat filter.
Fig. 26 Removing the side racks
Drop-down grill element
• To lower the grill element: use a flat-head screwdriver or a small coin to loosen the element fixing screws.
• When you have finished cleaning the oven ceiling, raise the grill element and screw the element fixing screws
back onto the studs. Make sure that the fixing screws are tightened and the element is held securely in place.
The grill element itself is self-cleaning.
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Induction/OR90SDBSIX2/User_Guide_OR90SDBSIX2/1…
Updated: Fri, 21 Aug 2020 14:54:17 GMT
Powered by
3
To Next Page
Loading...
