Fisher & Paykel QuickSmart - Page 37

35
CHANGING PRE-SET OPTIONS
Adjusting your options
1
Enter Option Adjustment mode (refer to page 34).
2
The diagram below shows how the wash cycle icons relate to the options you can change.
It also shows what will be displayed when you first enter Option Adjustment mode. Options
you can change are accessible using the ‘Heavy’ ‘Delicate’, ‘Wool’ and ‘Regular’ cycles.
Use this diagram to help you adjust the options, ie select the ‘Regular’ cycle button
to modify the wash temperature, select the ‘Heavy’ cycle button to change the out of
balance (OOB) recovery process, and so on.
WashSmart™ Eco washer and WashSmart™ washer (WashSmart™ Eco washer panel is shown)
Option Adjustment mode
OOB
Recovery
OOB
Recovery
QuickSmart™ washer
Option Adjustment mode
3
WashSmart™ Eco washer and WashSmart™ washer: Use the ‘Delay Start’, ‘More’ button
on the panel to scroll through the available settings of your selected option, eg to
increase or decrease the temperature of your warm wash temperature, or to change the
number of beeps at the end of the cycle.
QuickSmart™ washer : Uses ‘Water Level’ to scroll through the available settings.
OOB
Recovery
WashSmart™ Eco washer and
WashSmart™ washer
(WashSmart™ Eco washer panel is shown)
Changing the pre-set options
QuickSmart™ washer
Changing the pre-set options
OOB
Recovery