40
CHANGING PRE-SET OPTIONS
Factory reset
You can reset your washer to the settings it left the factory with:
1
Enter Option Adjustment mode (refer to page 34).
2
Select the ‘Delicate’ cycle.
3
The display will show . Touch and hold for 3seconds to reset your washer to its
factory settings.
Note: this action will reset the washer to the default settings, exit Option Adjustment
mode and restart the washer in normal operating mode.
Touch ‘POWER’ to exit if you do not wish to reset your washer.
Factory
Reset
WashSmart™ Eco washer, WashSmart™ washer and QuickSmart™ washer (WashSmart™ Eco
washer panel is shown)
Changing the washer back to the factory default settings
To Next Page
Loading...
