24
!3 TEMPORARILY FIXING YOUR PRODUCT AND ATTACHING DOOR STUDS
1 Carefully open the refrigerator French doors to
remove the installation aider attached. Untighten
the screwsx2 (M5 x 8 countersunk Phillips screws).
Repeat this process for the remaining aiders.
2 Carefully open the refrigerator French doors again,
and fix the appliance into the finished enclosure
with screws x1 (#8 x 19 twin thread screws).
Repeat this process on the opposite side.
3 Secure M8 studs into the
refrigerator doors, ensure
the open end faces the top.
Repeat this process for all
refrigerator doors.
4 Secure side screws (M5 x 10 pan
head Phillips screw) mid-way into
the refrigerator door.
Repeat this process for all
refrigerator doors.
To Next Page
Loading...
