Fisher & Paykel RS90A1 - Product & Cavity Dimensions

DATE: 20.04.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2''). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
PRODUCT & CAVITY DIMENSIONS
900mm ActiveSmart™ Slide-in Refrigerator
Model no:
RS90AU1 (with Stainless Steel Door panels PART NO. RD90U)
Cavity Dimensions
mm
a Overall height of cavity
1800
B Overall width of cavity
when adjoining cabinetry can share 4mm door gap
900
when adjoining cabinetry cannot share 4mm door gap
904
c Overall depth of cavity
650
Total front panel width with required gaps at sides = 904mm (E product width
+ 2 x F cabinetry gaps).
Total front panel height with required gap above = 1802mm (D product height
+ F cabinetry gap).
Product Dimensions
mm
D Overall height of product*
1798
E Overall width of product
896
F Minimum cabinetry gap clearance from edge of product
4
G Overall depth of product (excl. front door panels)
606
H Depth of toekick (measured from front of door panels)
50
I Height of grill/toekick*
100
vv Height of bottom drawer panel
598
K Height of top door panels
1096
L Depth of product front panels (excludes handles)**
18
* Includes mounted feet.
** Optional EZKleen Stainless Steel front panels – PART NO. RD90U.
INDICATES CAVITY CLEARANCES
B
PLAN VIEW
C
F
F
F
L G
D
K
J
A
E
B
I
A
C
H
FRONT VIEW PROFILE VIEW