What to do if calibration values are too far apart on Fisher Scientific Measuring Instruments?
If the calibration values are too far apart, or too far from ideal values, check the electrode, use fresh buffers, and check the meter settings. The electrode may require filling solution, conditioning, or replacement. Refer to the electrode manual.
How to calibrate temperature on Fisher Scientific Measuring Instruments?
Calibrate using a water bath or a known accurate thermometer. A faulty thermistor may also be the cause, consider repair or replacement.
What to do if Fisher Scientific Measuring Instruments show Over Range or Under Range?
Check that the electrode is connected.
Why are my pH calibration points too close on Fisher Scientific accumet AB250 Measuring Instruments?
Custom pH buffer calibration values must be at least 1.0 pH unit apart.
What to do if 2-point standardization has not been performed on Fisher Scientific Measuring Instruments?
Perform a 2-point standardization.
General| Brand | Fisher Scientific |
|---|---|
| Model | accumet AB250 |
| Category | Measuring Instruments |
| Language | English |
To Next Page
