Fisher 1290 - Type MR95 H Assembly; Mounting Parts

Type 1290
22
Figure 10. Type MR95H Assembly
APPLY LUBRICANT OR SEALANT
(1)
:
L1 = GENERAL PURPOSE PTFE OR LITHIUM GREASE
L2 = ANTI-SEIZE COMPOUND
L4 = GRAPHITE SEALANT
GF04914
1. Lubricants and sealant must be selected such that they meet the temperature requirements.
2. Apply L2 (anti-seize compound) on key 16 for stainless steel bolts.
3. Apply L4 (graphite sealant) instead of L1 (general purpose PTFE or lithium grease) on key 63 for graphite ring.
4. Apply L2 (anti-seize compound) on keys 3 and 5.
L1
L4
L2
L2
15
17
8
12
1
20
6
3
26
9
2
11
16
7
4
5
63
OR
(3)
L2
L4
OR
(4)
L2
(2)
L2
L4
OR
(4)
Key Description Part Number
Mounting Parts (Figure 11)
Key Description Part Number
16 Pipe Tee
Zinc-plated steel Galvanized Iron - - - - - - - - - - -
Stainless steel - - - - - - - - - - -
24 Tubing
Steel - - - - - - - - - - -
Stainless steel - - - - - - - - - - -
30 Mounting Bracket, Stainless steel - - - - - - - - - - -
31 Cap Screw, Stainless steel (2 required) - - - - - - - - - - -
32 Cap Screw, Stainless steel (2 required) - - - - - - - - - - -
35 Tubing Connector (4 required)
Steel - - - - - - - - - - -
Stainless steel - - - - - - - - - - -
36 Pipe Bushing
Steel - - - - - - - - - - -
Stainless steel - - - - - - - - - - -