Instruction Manual
D102005X012
846 Transducer
June 2017
42
Parts
Whenever corresponding with your Emerson sales office or Local Business Partner about this equipment, always
mention the transducer serial number.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher instrument. Use of components not supplied by Emerson Automation
Solutions may void your warranty, might adversely affect the performance of the instrument, and could cause personal
injury and property damage.
Parts Kit
Description Part Number
Repair Kit
[Kit includes O-rings (key 2, 5, 8, 9, 17)
and slip ring (key 16)] R846X000012
Parts List
Note
Contact your Emerson sales office or Local Business Partner for Part
Ordering information.
See table 5 and figure 24
Table 5. Parts List
Key No. Description
1 Terminal Compartment Cover
2* Terminal Compartment Cover O‐ring
3 Housing
4 Terminal Block Assembly
5* Electronic Circuit Board O‐rings
6 Electronic Circuit Board Assembly
7 Module Subassembly
8* Module O‐rings
9* Pilot/Actuator Assembly O‐rings
10* Pilot/Actuator Assembly
11 Pilot Actuator Assembly Screws
12 Nameplate Screws
13 Module Cover
14 Exhaust/Stroke Port Screen
15 Retaining Clip
16* Slip Ring
17* Module Cover O‐ring
*
Supply Gauge (see figure 22)
0‐60 psi/0‐400 kPa/0‐4 bar
SST 0‐60 psi/0‐400 kPa/0‐4 bar
Output Gauge (see figure 23)
0‐30 psi/0‐200 kPa/0‐2 bar B
0‐60 psi/0‐400 kPa/0‐4 bar B
SST 0‐60 psi/0‐400 kPa/0‐4 bar
*Recommended spare parts
To Next Page
Loading...
